How to Install Traeger Drip Tray Liner

How to Install Traeger Drip Tray Liner

These drip tray liners are made of silicon and are easy to install.

Just slide them into the tray of your Traeger grill and you’re done. Since the liners are made of solid material, they don’t leak, and they make an attractive decorative feature.

So, how to install traeger drip tray liner? First, you need to disassemble your Traeger grill, and clean the drip pan.

Then, take your drip pan outside and soak it in water for about 30 minutes. Next, using a pair of tongs, remove the drip pan from the water and place it on a heat safe surface.

Then, apply your heat safe tape to the bottom and sides of the drip pan. Finally, reassemble your Traeger grill and you’re ready to cook.

Contents

How to Install Traeger Drip Tray Liner

To begin, just slide the mat into your BBQ’s bottom cooking chamber where the metal grease cup would normally sit.

Then, remove the drip pan from the appliance and soak it in water for about 30 minutes to facilitate cleaning.

Then, using a pair of tongs, remove the drip pan from the water and place it on a heat safe surface.

Next, apply your heat safe tape to the bottom and sides of the drip pan.

Fold the edges gently so the tape adheres to the bottom all the way around the pan.

Finally, reassemble everything and you’re ready to go.

Benefits of Using Traeger Drip Tray Liner

It is simple to swap out the Traeger Drip Tray Liner when it needs cleaning or replacement.

It captures all of the fat and juices from your food during the cooking process to keep them from dripping on to your countertops or floor.

It is also quite lightweight which means it will not add unnecessary weight to your smoker or grill when it’s not in use.

The drip tray liner is simple to clean by washing it with warm water and gentle soap and then drying it with a towel before replacing it in the smoker or grill.

It aids in reducing the frequency that you need to clean your appliance by removing the excess oils from your foods before they fall onto the lower part of your barbecue which can be difficult to clean without a lot of elbow grease.

Where Does the Traeger Drip Tray Liner Go?

On the drip tray’s outside edge, insert four strips of heat resistant tape to keep the liner in place and prevent it from sliding around the oven.

A drip tray is situated on the side where you would usually place a propane tank with your barbecue.

If you keep the drip tray unwashed for an extended amount of time, the accumulated fats will harden and become more difficult to remove during cleanings.

How to Use Traeger Drip Tray Liner?

Once you’ve placed the Traeger drip tray liner as described earlier in the tutorial, you should wash it with warm soapy water and then dry it before placing back inside the oven.

Simply cook the dish as usual, and when the food is done, remove the food from the barbecue and serve.

The nicest aspect about utilizing the drip tray liners is that they will eliminate the need to wash out the grease cups on your appliances as they trap all of the fat that would normally end up on the bottom of your smoker or grill.

This is a significant benefit as it reduces the amount of time you spend cleaning and scrubbing your barbecues after use.

The ease of utilizing the grill without the constant worry that it will spill over on to your counter is also a big plus for the product as it improves the overall experience of your outdoor cooking.

These heat-resistant metal drip trays will catch all of the juices and fats from your meats, preventing it from splattering onto your floors, counters, or table.

Do You Really Need a Drip Tray on a Traeger Grill?

Yes, you do need to line the bottom of the Traeger drip tray to help keep your smoker clean. This will reduce the amount of time you spend cleaning your Traeger.

The drip tray liner will help keep grease off the table and floor.

The grease cup can catch most of the run-off, but if you think you need more help, go with the drip tray liner.

When Should You Replace Your Traeger Drip Tray Liner?

It is recommended that you replace the traeger drip pan once a year to ensure that the plastic is still in good condition and does not break apart into tiny pieces when put under the stress of heat.

You may also clean it in between uses with warm soapy water to prevent a buildup of grime.

How Do You Wrap a Traeger Drip Pan?

Turn off your Traeger appliance and remove the grill grates and heating elements.

Next, remove the grill grate from the side of the appliance where the drips will be deposited.

Insert the Traeger drip tray liner into the space created by the removed grate and secure with strips of heat resistant tape if necessary.

Fold all of the tabs down over the drips and pour any remaining liquid over the side to prevent it from dripping back into the heating elements.

Make sure there are no holes outside or inside the pan to prevent leakage of melted fat onto the surface of your barbecue.

Reassemble everything and fire up the grill.

What is the Traeger Drip Tray Liner Alternative?

Traeger drip tray liner alternative are pans that you can put directly under the heat source to catch the drippings from your meat.

You may also use aluminum foil to create the same effect.

Aluminum foil is less expensive, but you will create a lot of mess when using it.

If you choose the drip tray liner, you won’t have to worry about cleaning it after each BBQ.

The drip tray liner catches all the grease and drippings which significantly reduces the cleanup that is required after use.

Also, if you prefer to use aluminum foil, make several slits along the top of each foil piece to allow air to circulate underneath and prevent overheating of the grease in your cooking chamber.

Also Read: How Does A Traeger Ignite?

Conclusion

If you like cooking on your Traeger grill as most of us do, you will want to line the bottom of the traeger drip pan with a heat resistant plastic container to catch all the drippings and oils from your cooked meats.

Trager drip tray liners are a blessing, and I recommend that you buy them along with your pellet grill so that you do not spend extra time cleaning up after your BBQ.

The liner not only simplifies the cleaning process, but it also saves you time and money because you won’t have to buy other pans or disposable containers to catch all your cooking oils.

After each cooking session, no need to worry about wiping down your grill and cleaning away the mess.

Simply place this gem on your drip pan and watch as all the excess oil and fat collect in it instead of on your beautiful stainless steel grates.

Scroll to Top