The mechanism behind these two error codes is relatively simple.
Both LERR and ERR displays the contents of an error message in the operating system’s console. Since troubleshooting these errors is a tedious task, we shed some light on what they are and what to do to remedy them.
So, how do you fix ERR and LEr error on the traeger pellet grill? Let’s start with the most common problem, ERR.
This error indicates that the pellet hopper is not warm and that the auger motor is not spinning. To solve this error, first make sure the hopper is warm.
This can be achieved by turning on the power and letting it warm up for an hour, and then firing the grill for 5 minutes with the cover closed. If the hopper is still cold after an hour, check the auger motor to make sure it’s spinning.
If it’s spinning, then make sure the motor is plugged in and turned on. If it’s not spinning, try replacing the auger motor, which can be purchased online for about $100.
If replacing the motor doesn’t solve the problem, then contact the manufacturer for a replacement grill.
Contents
Traeger HEr Code
Traeger is a manufacturer of wood pellet grills and smokers.
They sell their products worldwide and have thousands of customers. Traeger’s grills are renowned for their quality, and they’re often compared to high-end gas grills and smokers.
However, Traeger’s grills come at a much cheaper price than their competitors, making them very popular among customers. Traeger’s products are famous for their versatility.
For example, Traeger grills are famous for their versatility with different types of wood. Traeger grills can be used to smoke food, grill food, bake food, and even barbecue fish or chicken.
Traeger’s products have everything you need to create delicious meals.
How to Fixing HEr on Traeger
Traeger makes the best barbeque, hands down. Traeger is known for its excellent craftsmanship and great design, but it is not without its problems. This guide will help you troubleshoot some common issues you might encounter while using your Traeger.
Wood Smoke is leaking out from the lid
Solution: The problem might be that the venting kit is not fully connected or that the venting kit is clogged.
To fix the problem, you should thoroughly clean the venting kit with a wire brush.
Make sure there’s no debris in the vent tube. If that doesn’t work, replace the kit with a new one.
The grill won’t light
Solution: If the igniter button isn’t glowing, then you need to replace the igniter. If the igniter is glowing but the grill won’t ignite, then you need to replace the ignitor.
Grill is smoking excessively
Solution: If your grill is smoking excessively, then there are several reasons it could be happening.
First, check your venting kit to make sure it’s connected properly and not clogged.
Next, check if the temperature is set correctly. The grill itself might be malfunctioning or dirty.
Check the vent tubes and grill grids to make sure they’re not clogged.
The grill won’t heat up
Solution: If the grill won’t heat up, then first check the venting kit to make sure it’s connected properly and not clogged.
Next, check the gas pressure to make sure it’s at the correct pressure. If the grill still won’t heat up, replace the ignitor or thermostat.
Grill won’t turn off
Solution: If the grill won’t turn off, then first check the venting kit to make sure it’s connected properly and not clogged.
Next, check the gas pressure to make sure it’s at the correct pressure. If the grill still won’t turn off, then replace the ignitor or thermostat.
Traeger LEr Code
The LEr Code is a Traeger grill made by Traeger Grills.
It’s a pellet grill with a digital controller that makes it easy to set and maintain temperatures. It has a 300 square inch cooking surface and a 15-pound wood pellet hopper.
It comes with a remote that allows you to set and monitor temperatures from your couch. It also comes with a digital thermometer that allows you to check on food without having to open the grill.
Finally, the grill has 4 collapsible legs that allow you to easily move it around. Overall, the
How to Fix Fixing LEr Code on Traeger Grill
Traeger Grills are among the best wood pellet grills on the market. However, not all of its parts are created equal. In fact, the hopper and lid are some of the least durable parts of the grill. Luckily, these parts are easy to replace.
Hopper
The hopper is the compartment that holds the wood pellets.
It is made of heavy-gauge, powder-coated steel and holds up to 15 pounds of pellets. When a pellet grill starts to lose efficiency, the hopper is usually the culprit.
The hopper is designed to withstand the heat produced by the grill and the pellets, but over time it can become clogged with ash and debris.
To clean the hopper, use a brush to loosen the ash and debris, then remove the hopper from the grill and soak it overnight in a bucket of hot water.
This will help loosen any debris. When cleaning is complete, allow the hopper to dry and reinstall it on the grill.
Lid
This part on the Traeger grill is made of heavy-gauge steel and holds up to 30 pounds of pellets.
However, over time, the lid can become clogged with ash and debris, limiting the amount of pellets that the grill can hold.
To clean the lid, open the latch and remove the cover from the grill.
Then, use a brush to loosen the ash and debris. Once the cover is clean, clean the latch and reinstall it on the grill.
Traeger ERR/ER1 Code
Traeger grills are known for their exceptional performance.
However, sometimes Traeger grills perform poorly. One of the most common error codes for Traeger grills is the ERR/ER1 code.
This code appears when the grill is unable to maintain the proper temperature or fails to light properly. There are several reasons why this happens.
First, it’s possible that your grill isn’t getting sufficient power. This can happen if the electricity drops or if there is a power surge.
Second, it’s possible that your grill isn’t getting enough heat. This can happen if your grill isn’t fully plugged in or if your grill isn’t properly cleaned.
Finally, it’s possible that the temperature sensor has failed. This is easy to do if you accidentally knock the sensor loose or if a wire is disconnected.
Fortunately, fixing these errors is simple. First, check the power connection.
If it’s loose or disconnected, plug it back in. Next, check the temperature sensor.
You may need to replace it completely or partially repair it. Finally, clean the grill thoroughly.
If the problem persists, you may need to contact Traeger directly.
How To Fix ERR or ER1 Error on Traeger
An error 1 message on the Traeger grill can be an intimidating problem. An error code may be displayed on a Traeger grill when you turn on or close the Traeger, but it will not go away no matter what you do.
The error code on the Traeger grill might be hard to decipher, and that’s the problem. This message on the Traeger grill indicates a problem with the grill’s temperature controller.
This specific problem occurs when you turn on the Traeger grill and it does not reach the set temperature, or the error returns to the set temperature shortly after it is reached.
This can be caused by clogged burners, a clogged heat plate, or a clogged auger.
You can fix an error code on the Traeger grill by cleaning the burner vents, cleaning the heat plate and auger, and by resetting the Traeger to the default factory settings.
These troubleshooting tips will help you resolve your Traeger error codes.
- Cleaning the burner vents – Cleaning the burner vents is an easy fix for Traeger error codes. Using a thin wire, remove the vent caps from the burner caps and clean the burner vents with a wire brush.
- Cleaning the heat plate and auger – Cleaning the heat plate and auger are another easy fix for Traeger error codes. Using a thin wire, remove the heat plate and clean it with a soft wire brush. To clean the auger, remove the auger tube and clean it with a soft wire brush.
- Resetting the Traeger to default factory settings – If your Traeger error code problem persists, try resetting the Traeger settings to factory defaults. To do this, unplug the Traeger from the electrical outlet and disconnect the propane tank from the grill. Then press and hold the power button for 15 seconds, plug it back in, and press the power button to turn on the grill.
Traeger ER2 Error Code
The error code ER2 on the Traeger grill means that there is something wrong with the exhaust temperature sensor.
The sensor is a component of the exhaust control system, which regulates how much air gets to the pellet burners in the grill. The sensor tells the control system when to turn the burners on and off.
If the sensor doesn’t detect any heat coming through the exhaust ducts, it shuts the burners off. This prevents overheating and damage to the grill.
However, if the exhaust temperature sensor fails, it won’t be able to sense the heat coming through the ducts and shut the burners off when it shouldn’t.
This will cause overheating and damage the grill.
How To Fix ER2 Error on Traeger
This error is commonly caused by an overheating sensor on the Traeger pellet grill. The sensor detects when the temperature is too high for grilling and triggers the ER2 error message.
This stops the grill from working until the sensor cools off.
Unfortunately, this can be frustrating for anyone who uses their Traeger grill regularly.
If you’re experiencing ER2 errors, follow these simple steps to fix the problem:
- Check the temperature gauge – First, check if the temperature gauge is reading 250 degrees F or more. If the temperature reading is not at or above this level, then the sensor is not overheating.
- Shut down the pellets – If your Traeger grill has an automatic pellet feeder, shut it off and allow it to cool down.
- Reset the sensor – Once the grill has cooled down, turn the grill on again. Wait 10 seconds for the grill to reach temperature, then shut off the grill and allow it to cool for 30 seconds.
- Reset the sensor one more time – Turn the grill on one last time and wait 10 seconds for the grill to reach temperature. Shut off the grill and allow it to cool for 30 seconds.
- Turn on the grill – Turn on the grill and allow it to reach temperature.
- Check for ER2 errors – Now, change the temp gauge setting on the grill to the high setting and grill for 10 minutes.
If the error persists, you’ll need to contact Traeger customer service to get a replacement sensor.
Also Read: Traeger Grill Not Heating Up to 450
Final Words
We hope that this article helped you fix Traeger errors on Traeger Grills.
However, Traeger Grills also have error codes like Traeger LERR and Traeger ERR. Traeger LERR and ERR are error codes that can pop up on the Traeger Grills screen.
These error codes can be related to Traeger Grills ignition problems, low propane level, or problems with Traeger Grills temperature controls. These error codes can also be related to Traeger Grills temperature displays.
However, these error codes can also be related to other Traeger errors. In any case, the troubleshooting steps for LERR and ERR errors are similar.
We suggest you troubleshoot your Traeger Grills by reading our Traeger Grills error code guide.
