Some homeowners desire the realistic look of a wood grill but prefer the functionality of a ceramic grill.
They often wonder if an extension cord can be used to power their grill. The answer is yes.
An extension cord can be used to extend the length of the wiring in your existing plug and ignition system. So, can you use an extension cord on a traeger grill?
The short answer is yes; an extension cord can be used on a Traeger grill. However, an extension cord should not be used as the only power source for a Traeger grill.
Instead, you can use an extension cord as a temporary power source when the power goes out or when you can’t easily get to power.
Furthermore, an extension cord should not be plugged into an outdoor outlet.
Instead, the extension cord should be plugged into an electrical outlet indoors, and then plugged into an outdoor outlet.
Contents
Can You Use An Extension Cord On a Traeger Grill?
The Traeger pellet grill is a versatile piece of cooking equipment that works a lot like a traditional charcoal grill.
You can grill meat, vegetables, and even pizza on a Traeger pellet grill.
While you can use it to cook almost anything, there are some foods you shouldn’t put on a Traeger pellet grill because it isn’t designed to be used as a deep fryer.
For example, you should never use butter or deep-frying oils on a Traeger pellet grill because they will damage the igniter and electronics. You should never use aluminum foil either, because it can block air intakes.
Also, you should never use frozen or refrigerated foods on a Traeger pellet grill because the cold can condense in the pellet hopper and damage the igniter.
Finally, you shouldn’t use wood chips or pellets that have been treated with anything other than pure hardwood.
Using these oils or chemicals can create a fire hazard.
How Do Pellet Grills Consume Electric Power?
Pellet grills are a type of grill that uses wood pellets rather than charcoal or gas to produce heat. Outdoor cooking enthusiasts prefer pellet grills because they do not produce smoke and can be fired up quickly. Pellet grills are not only easy to use, but they are also less costly to operate than other grills.
However, a lot of people are curious about how much electricity pellet grills consume. This is a valid concern because pellet grills’ heating elements need to be on constantly in order for them to function. It would be a huge waste of electricity if the heating elements were on while the grill was not being used.
To answer this question, we need to look at how wood pellet grills are powered. Most pellet grills are powered by electricity.
Because they have a thermostat that uses a programmable timer to turn the heating elements on.
When the grill has reached the right temperature for cooking, the thermostat turns off the heating elements.
When cooking with pellets, we usually put a little fuel in the fire at the beginning and add more fuel when the fire gets low. Cooking with pellets is similar to cooking with charcoal because the temperature increases as the fuel is consumed. Therefore, if you increase the temperature, you will use more electricity.
The rate of pellet consumption depends on several factors, including pellet quality, ambient temperature, and pellet grill model.
On average, a pellet grill uses around 25 watts per hour when cooking at high temperatures.
Specifications of an Extension Cord
Indoor or Outdoor Power Cord
Indoor and outdoor extension cords are both meant to connect two devices together.
However, they are used for different purposes. Indoor extension cords are thin and flexible, and meant to be hidden from view.
They are often plugged into power outlets near furniture and other home appliances. They are typically used for indoor furniture, lamps, clocks, and other small appliances.
Outdoor extension cords are designed to be stronger and more durable than indoor extension cords. They are often white to prevent sun damage and allow easy visibility.
Outdoor extension cords are used to connect outdoor devices like lights, fans, and power tools to power outlets.
Three-Prong Extension
An extension cable is a type of electrical cable that has one end that is permanently connected to a power source or surge protector and the other end that can be plugged into a receptacle.
Extension cables can be used in multiple ways, including for running power cables from outlets to computers or other electrical equipment, running electrical lines from household appliances, and running electrical lines to exterior outlets.
Extension cables are especially useful in homes and apartments that have outlets in inconvenient places or where electrical lines run beneath floors or through walls.
Length of Cord
One of the specifications of an extension cord is its length.
This specification refers to the length of the cord itself, not the cable inside. An extension cord’s length is measured in feet and inches, or centimeters.
For instance, an extension cord with a 3-foot length has an actual length of 36 inches. An extension cord with a 12-foot length has an actual length of 144 inches.
Different sizes of extension cords have different actual lengths.
Gauge of Cord
The gauge of a cord is the measurement of the diameter of the electrical wire inside an extension cord.
The higher the gauge number, the smaller the wire. A 10-gauge extension cord, for example, has a smaller diameter wire than a 12-gauge extension cord.
As a rule of thumb, the thicker the gauge number, the thicker the wire. The gauge of the cord is one of the specifications of an extension cord.
When shopping for an extension cord, it’s important to consider the gauge of the cord, as it will determine how strong the wires are inside the extension cord. You’ll need an extension cord that can handle the load you’re going to put on it.
For example, if you’re going to run a blender off of an extension cord, you’ll need an extension cord that can handle the load of that blender.
As a general rule, the thicker the wire of an extension cord, the stronger it is and the heavier it can be.
The Things To Keep in Mind for the Extension Cord for Pellet Grills
The extension cord for pellet grills is an electrical cable used to connect a pellet grill to the power source outside the grill.
The cord mainly serves two purposes: to charge the hopper and to run the grill.
Therefore, one should expect the cord to have a certain length depending on these two purposes.
The cord length is determined in terms of length to the power source and length to the pellet grill.
The length of the pellet grill is the length of the cord that is required to plug in the grill. The length of the power source is the length of the cord from the outlet to where the grill is plugged in.
The cord length to the power source should be about 20 feet, and the cord length to the pellet grill should be about 10 feet.
The cord should be long enough to be plugged into the outlet. The cord length from the outlet to the grill should be about 10 feet. The cord length from the outlet to the power source should be about 20 feet.
The cord should be durable. It should be able to withstand the high temperatures created when grilling. The cord should also be able to carry the necessary amount of amps.
The cord should be pliable. It should be able to withstand the bends, twists, and squeezes that come with grilling and moving around the grill.
The cord should be heat resistant. The cord should be fireproof and should not melt or get damaged when exposed to heat.
Best Extension Cords for Pellet Grills
US Wire and Cable 74050
Wire and Cable 74050 is a 24-strand cable made from 100 percent pure copper.
It’s made in the USA, and it’s suitable for a wide range of uses, including computers, phones, audio equipment, and appliances. Wire and Cable 74050 is also UL-listed, which means it meets all of the industry’s quality guidelines.
If you’re shopping for wire and cable, Wire and Cable 74050 is a great choice.
Woods AgriPro 2451
Pellet grills are more convenient than gas grills.
First of all, pellet grills are cleaner than gas grills. This is because there’s no open flame or dripping grease to worry about.
The other main advantage is that pellet grills don’t need lighter fluid or lighters. Finally, pellet grills are easier to clean out than gas grills.
Simply turn off the grill, remove the grill pan, and remove the pellets from the hopper. The cleanup process takes only minutes.
With the Woods AgriPro 2451, there’s no need to worry about charred food sticking to the grill pan. It’s one of the best extension cords for pellet grills.
Also Read: Are Pellet Grills Good for Burgers?
Final Words
In conclusion, yes, you can plug your Traeger grill into an extension cord.
Just make sure you use the correct wire gauge for your extension cord. To find the right wire gauge, you’ll need to look at the amps that your Traeger uses.
You can find this information in your owner’s manual or on the Traeger website.
If you need any help finding this information or have any questions about an extension cord, leave a comment and I’ll try to answer them.
