Having trouble with your Blackstone Griddle that won’t light? You’re not alone. Many people have encountered this issue, and it can be tricky to figure out how to fix it.
But don’t worry – we’ve got you covered.
In this blog post, we’ll look at the most common causes of a Blackstone Griddle that won’t light and provide step-by-step instructions on how to get it up and running again.
From finding the fuel source to troubleshooting the ignitor, we’ll cover all the bases so you can get cooking as soon as possible.
So if you’re ready to tackle your griddle’s lighting problem, keep reading for all the details you need.
Contents
Causes of Blackstone Griddle Not Lighting
This is a common issue that can be caused by a variety of factors.
The most likely culprit is a faulty igniter.
Think of it like the spark plug in your car – if it’s broken or not working correctly, you won’t get any heat.
Another possible cause is a blocked gas line.
If there’s something obstructing the flow of gas to the burner, it won’t be able to light up, as simple as that.
It could also be an issue with the regulator or pressure valve – this controls how much gas gets to the fire, and if it’s malfunctioning, there won’t be enough fuel for it to ignite.
And finally, if there are any electrical wires in your griddle, this could be why your Blackstone griddle isn’t lighting up properly.
How to Troubleshoot a Blackstone Griddle
This guide will take you through all the steps necessary to troubleshoot your griddle and get it running again in no time.
Check the Power Source
Before anything else, make sure that your griddle is plugged in correctly and that the outlet has power.
If not, no matter what else you do, it won’t be able to light up.
Check the Propane Tank and Regulator
Ensure that the propane tank is full and that the regulator valve is open.
This will provide your griddle with enough fuel to start up.
Light It Manually
If all else fails, try manually lighting it with a lighter or match.
This should get it going without any further issues.
Replace the Igniter or Spark Module
If manual lighting doesn’t work, you may need to replace the igniter or spark module with a new one.
Your griddle will be back up and running soon after.
Reset the Regulator
As a final step, try resetting the regulator by turning it off for a few minutes before turning it back on again.
This can often ignite the ignition and get your griddle working again.
How to Ignite a Blackstone Griddle with a Lighter
When it comes to grilling, safety should always be the top priority.
While it is possible to ignite a Blackstone Griddle with a lighter, this method is not recommended.
There are inherent risks associated with this method of ignition that can lead to an unhealthy environment and potential harm.
To ensure your grilling experience is both safe and enjoyable, it is important to be aware of the dangers posed by using a lighter to ignite your Blackstone Griddle and alternative methods of ignition.
If you choose to use a lighter as your means of ignition for your Blackstone Griddle, there are several safety precautions that should be taken beforehand.
First, make sure that the gas line is off before attempting to light the griddle.
Remove the grates from the top and preheat the surface for 5-10 minutes before lighting it up.
Once preheated, use a long-reaching lighter or fireplace matchstick to ignite the fire at its lowest setting before increasing the flame size as desired.
During this process, make sure you wear protective gloves and have an extinguisher nearby in case of fire.
How to Reset the Regulator on a Blackstone Griddle
What is the Regulator on a Blackstone Griddle? The regulator is an essential part of a Blackstone griddle and plays an important role in maintaining the temperature of the griddle.
It works like a throttle switch on an engine, controlling the amount of gas delivered to each burner and helping to keep them warm.
Without it, your griddle will remain lifeless and unresponsive.
Resetting your regulator is easy and can be done in just a few steps.
Begin by disconnecting the power supply from your grill, then removing the regulator and checking for any blockages in the hose.
If there are any blockages, simply remove them before reconnecting the regulator and plugging in the power source again.
Turn on each burner one at a time until all burners are lit, then adjust each burner’s temperature control knob as desired and you’re ready to start cooking.
How to Light a 36 inch Blackstone Griddle
Griddles come in all shapes and sizes – and the 36 inch Blackstone Griddle is no exception.
To get this powerful griddle up and running, you need more than just a lighter.
This blog post will show you how to light your 36 inch Blackstone Griddle safely and correctly.
Using the Right Igniter
The first step to lighting your griddle is finding the correct igniter for your model.
Using the wrong igniter can lead to a dangerous buildup of gas, which could result in an explosion or fire.
Once you’ve found the right match, you can move onto the next step.
Connecting Your Propane Tank
The most common way to light a 36 inch Blackstone Griddle is with a propane tank and an adjustable regulator.
Before attempting to light your griddle, make sure that your propane tank is securely connected and that the gas is turned on.
Then adjust the regulator knob until you hear a clicking sound coming from your igniter – this indicates that gas is flowing through the system and ready for ignition.
Lighting Your Grill
Once all safety checks have been completed, it’s time to light your griddle. To do this, press down on the igniter button until you see a spark or flame appear from it.
If no spark or flame appears, try adjusting the regulator knob again until one or both of these results are achieved.
Once lit, adjust your regulator knob as desired until you reach your desired temperature setting – then you’re ready to begin cooking.
How to Light a 28 inch Blackstone Griddle
Cooking up a delicious meal on a 28-inch Blackstone Griddle is a great way to enjoy the outdoors.
However, before you can get started, you need to light the grill first.
Thankfully, this process is simple and straightforward once you know what to do.
To begin with, check that the propane tank is connected properly and that the regulator is adjusted correctly.
This will ensure your griddle has enough gas to heat up properly.
Then, make sure all of the knobs are in their correct positions before lighting it.
When everything is ready, use a long lighter or match and hold it at least 6 inches away from the burner when igniting it.
If done correctly, this should produce a spark or flame.
If not, please check for gas leaks or adjust the regulator as needed before trying again.
If your griddle still won’t light after these steps, you may need to replace the igniter battery with a new one.
Tips for Maintaining Your Blackstone Griddle
How to Keep Your Blackstone Griddle in Prime Condition
Your Blackstone griddle is an essential tool for crafting delicious meals.
To keep it in prime condition, however, you need to take certain steps to maintain it.
Here are some tips on how to preserve your Blackstone Griddle so that you can make the most out of your culinary creations.
- Clean the griddle after each use. This will help prevent the build-up of grease and food particles that can cause sticking and uneven cooking results.
- Use a stiff brush and soapy water to scrub the griddle surface, then make sure it is completely dry before storing it away or using it again.
- Apply a thin layer of cooking oil to the griddle surface before each use to avoid sticking and rusting. If you notice rust spots, remove them with steel wool or a wire brush, then apply a thin layer of cooking oil to help prevent further rusting.
- Make sure your griddle is level when in use; this will help ensure even heat distribution and reduce the risk of uneven cooking results.
- Store your griddle in a cool, dry place when not in use to help protect it from damage due to extreme temperatures or moisture exposure.
- Regularly inspect the griddle for any signs of wear and tear, such as rust or cracks in the surface; if any are found, replace them immediately to avoid any further damage to the griddle surface.
- Check all connections, such as gas lines or electrical cords, for any signs of wear or damage as well and replace if necessary.
- Inspect the regulator on your Blackstone Griddle regularly for proper functioning and look for any leaks that could cause a fire hazard; replace if needed.
- Keep your Blackstone Griddle away from moisture and heat sources, as this could damage its surface over time.
Finally, apply a thin layer of cooking oil after each use; this will help maintain its longevity and ensure that it works properly every time you cook with it.
Conclusion
If you want to make delectable meals with a Blackstone Griddle that will last for years, you need the right care.
This blog post has all the information you need to get your griddle up and running.
From finding the fuel source to replacing defective parts, we’ve got you covered.
